Two component, white, flexible tile/stone adhesive for wood & metal surface
Two-part, white adhesive comprising of rubber-based powder and water based polymer liquid. Flexible adhesive for use in areas where tiling is likely to be subjected to some limited background movement or vibration, especially wood, plywood & metal surface.
Suitable for fixing at 2 – 10mm bed thickness wall and floor tiles, glass mosaics, vitrified tiles and natural/engineered stones in interior and exterior installations, including swimming pools. Also suitable for use on floors subjected to light traffic conditions, but bed thickness must not to exceed 10mm. No traffic should be allowed on the floor for at least 24 hours after completion of tiling. With dense or impervious surfaces, drying-out and setting time of the adhesive may be delayed.
• High performance flexible adhesive
• Suitable for wood & metal surface
• High tensile strength
• Water and frost resistant
• Suitable for use in interior and exterior locations
• Suitable for submerged conditions
• Meets the requirement of IS 15477: 2004
Approximately 4.50 m²/kit using a 6mm x 6mm square notch trowel